重庆工商大学学报（自然科学版）

引用本文:	杜彦斌，余川，汪浩.基于微量润滑的机床再制造清洁化提升方法(J/M/D/N,J:杂志，M：书，D：论文，N：报纸).期刊名称,2020，37（3）：23-28
	CHEN X. Adap tive slidingmode contr ol for discrete2ti me multi2inputmulti2 out put systems[ J ]. Aut omatica, 2006, 42(6): 4272-435

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 646次下载 1085次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
基于微量润滑的机床再制造清洁化提升方法
杜彦斌，余川，汪浩^1,2,3,4
1.重庆工商大学制造装备机构设计与控制重庆市重点实验室，重庆 400067;2.重庆工商大学机械工程学院，重庆 400067;3.重庆万盛福耀玻璃有限公司，重庆 400800;4.隆鑫通用动力股份有限公司，重庆 400052）

摘要:

针对我国机床加工过程中仍大量使用切削液、整体清洁化程度不高的问题，提出了一种基于微量润滑的机床再制造清洁化提升方法;方法基于微量润滑技术对老旧机床实施再制造清洁化提升，包括老旧机床绿色化问题及污染源分析、再制造清洁化提升可行性分析、微量润滑装置的选用及设计（包括机械管路系统设计、电气控制系统设计两个部分）、机床结构匹配与再设计等过程;某齿轮加工机床的应用案例表明：采用微量润滑技术，可有效提升老旧机床的清洁化水平，经济及环境效益显著。

关键词: 机床清洁化提升微量润滑再制造

DOI：

分类号:

基金项目:

Cleanliness Improvement Method of Machine Tool Remanufacturing Based on Minimal Quantity Lubrication

DU Yan-bin, YU Chuan, WANG Hao^1,2,3,4

1.Chongqing Key Laboratory of Manufacturing Equipment Mechanism Design and Control, Chongqing Technology and Business University, Chongqing 400067, China;2. College of Mechanical Engineering, Chongqing Technology and Business University, Chongqing 400067, China;3. Chongqing Wansheng Fuyao Glass Co.Ltd., Chongqing 400800, China;4. Loncin Motor Co., Ltd., Chongqing 400052, China

Abstract:

In view of the problems that cutting fluid is still used in the process of machine tools and their cleanliness degree is too low, a cleanliness improvement method of machine tool remanufacturing based on minimal quantity lubrication is proposed. This method introduces the technology of minimal quantity lubrication to implement cleanliness improvement for used machine tools based on remanufacturing, including the procedures of analysis of cleanliness problem and pollution source of used machine tools, feasibility analysis of cleanliness improvement by remanufacturing, selection and design of equipment of minimal quantity lubrication (including mechanical piping system design and electrical control system design), structure matching and redesign of used machine tools, and so on.The application case of a gear cutting machine shows that the use of minimal quantity lubrication can improve the cleanliness of used machine tools effectively, and the economic and environmental benefits are remarkable.

Key words: machine tool cleanliness improvement minimal quantity lubrication remanufacturing